Collectie 172+ Biqu B1 Retraction Settings

Collectie 172+ Biqu B1 Retraction Settings. I've tried, but i can't seem to get it to the same level as my old ender3. Number of top layers (filament with good bridging may need fewer top layers to get a good finish). Still a noob so i don't know how to interpret this, maybe someone will have any ideas.

Hier Biqu B1 The Review Sebastiaan Dammann

The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2. I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. I've tried, but i can't seem to get it to the same level as my old ender3.

Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+).

29.03.2021 · i have just acquired my first 3d printer, a biqu b1. You can check if the upgrade took by looking at the sd card. 29.03.2021 · i have just acquired my first 3d printer, a biqu b1. Overall i'm quite pleased with the printing results but i'm having minor defects on the benchy test. It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements. The other thing a cant find any good settings is the retraction distance and speed. The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2.

30.01.2021 · bonjour à toutes et à tous !dans cette vidéo, nous abordons le leveling automatique via 3dtouch sur une biqu b1 et/ou carte mère skr.vous pourrez retrouver l. Still a noob so i don't know how to interpret this, maybe someone will have any ideas. It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements.. I've tried, but i can't seem to get it to the same level as my old ender3.

You can check if the upgrade took by looking at the sd card. 29.03.2021 · i have just acquired my first 3d printer, a biqu b1. 30.01.2021 · bonjour à toutes et à tous !dans cette vidéo, nous abordons le leveling automatique via 3dtouch sur une biqu b1 et/ou carte mère skr.vous pourrez retrouver l. The other thing a cant find any good settings is the retraction distance and speed. Overall i'm quite pleased with the printing results but i'm having minor defects on the benchy test. Not perfect on the red part (need to play with retraction settings), but good enough Number of top layers (filament with good bridging may need fewer top layers to get a good finish). But even now i get a lot more stringing than i'd like, especially compared to my old ender. Gcode from teaching tech's calibration github, with settings as shown on pic.printer: I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements.. 16.10.2021 · the settings that need tuning include:

The other thing a cant find any good settings is the retraction distance and speed. Gcode from teaching tech's calibration github, with settings as shown on pic.printer: Currently on the process of recalibrating my biqu b1. You can check if the upgrade took by looking at the sd card. If it renames the firmware.bin to firmware.cur then it applied it. Overall i'm quite pleased with the printing results but i'm having minor defects on the benchy test... 29.03.2021 · i have just acquired my first 3d printer, a biqu b1.

But sometimes it still underextrudes on the layer beginning... It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements. But even now i get a lot more stringing than i'd like, especially compared to my old ender. Not perfect on the red part (need to play with retraction settings), but good enough

First, go to the 'travel' settings and check the 'enable retraction' box to enable it retraction speed: . I've tried, but i can't seem to get it to the same level as my old ender3.

If it renames the firmware.bin to firmware.cur then it applied it. 30.01.2021 · bonjour à toutes et à tous !dans cette vidéo, nous abordons le leveling automatique via 3dtouch sur une biqu b1 et/ou carte mère skr.vous pourrez retrouver l. Then reboot the printer and it will upgrade it. It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements. Still a noob so i don't know how to interpret this, maybe someone will have any ideas.. Currently on the process of recalibrating my biqu b1.

I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. Number of top layers (filament with good bridging may need fewer top layers to get a good finish). Still a noob so i don't know how to interpret this, maybe someone will have any ideas. Just curious if anyone has dialed their b1 retraction settings well (for pla). First, go to the 'travel' settings and check the 'enable retraction' box to enable it retraction speed: Not perfect on the red part (need to play with retraction settings), but good enough. The stock profile settings of 7mm & 70mm/s didn't work too well for me, and after many, many retraction tests i've settled for the slightly better results at 3mm distance.

If it renames the firmware.bin to firmware.cur then it applied it.. Overall i'm quite pleased with the printing results but i'm having minor defects on the benchy test. The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2. Currently on the process of recalibrating my biqu b1. 16.10.2021 · the settings that need tuning include: I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. Not perfect on the red part (need to play with retraction settings), but good enough Still a noob so i don't know how to interpret this, maybe someone will have any ideas.. Just curious if anyone has dialed their b1 retraction settings well (for pla).

The other thing a cant find any good settings is the retraction distance and speed. I've tried, but i can't seem to get it to the same level as my old ender3. Currently on the process of recalibrating my biqu b1. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+). The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2. First, go to the 'travel' settings and check the 'enable retraction' box to enable it retraction speed:

It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements. The other thing a cant find any good settings is the retraction distance and speed. Retraction distance (some have tuned down to 3mm with the bowden setup). I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. 30.01.2021 · bonjour à toutes et à tous !dans cette vidéo, nous abordons le leveling automatique via 3dtouch sur une biqu b1 et/ou carte mère skr.vous pourrez retrouver l.. Gcode from teaching tech's calibration github, with settings as shown on pic.printer:

To update the firmware you need to put the 'firmware.bin' on an sd card, then put it in the slot closest to the gantry (not by the lcd). 16.10.2021 · the settings that need tuning include: You can check if the upgrade took by looking at the sd card. I've tried, but i can't seem to get it to the same level as my old ender3. Not perfect on the red part (need to play with retraction settings), but good enough Then reboot the printer and it will upgrade it. I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. If it renames the firmware.bin to firmware.cur then it applied it. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+). Gcode from teaching tech's calibration github, with settings as shown on pic.printer: But even now i get a lot more stringing than i'd like, especially compared to my old ender.

The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2.. But even now i get a lot more stringing than i'd like, especially compared to my old ender... First, go to the 'travel' settings and check the 'enable retraction' box to enable it retraction speed:

The other thing a cant find any good settings is the retraction distance and speed. Gcode from teaching tech's calibration github, with settings as shown on pic.printer: Number of top layers (filament with good bridging may need fewer top layers to get a good finish). It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+). Retraction distance (some have tuned down to 3mm with the bowden setup). 30.01.2021 · bonjour à toutes et à tous !dans cette vidéo, nous abordons le leveling automatique via 3dtouch sur une biqu b1 et/ou carte mère skr.vous pourrez retrouver l. 29.03.2021 · i have just acquired my first 3d printer, a biqu b1. Still a noob so i don't know how to interpret this, maybe someone will have any ideas. Currently on the process of recalibrating my biqu b1.

To update the firmware you need to put the 'firmware.bin' on an sd card, then put it in the slot closest to the gantry (not by the lcd). Then reboot the printer and it will upgrade it. Not perfect on the red part (need to play with retraction settings), but good enough I've tried, but i can't seem to get it to the same level as my old ender3. The stock profile settings of 7mm & 70mm/s didn't work too well for me, and after many, many retraction tests i've settled for the slightly better results at 3mm distance. The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2. 16.10.2021 · the settings that need tuning include: To update the firmware you need to put the 'firmware.bin' on an sd card, then put it in the slot closest to the gantry (not by the lcd). But sometimes it still underextrudes on the layer beginning. Overall i'm quite pleased with the printing results but i'm having minor defects on the benchy test. If it renames the firmware.bin to firmware.cur then it applied it.. To update the firmware you need to put the 'firmware.bin' on an sd card, then put it in the slot closest to the gantry (not by the lcd).

First, go to the 'travel' settings and check the 'enable retraction' box to enable it retraction speed: Gcode from teaching tech's calibration github, with settings as shown on pic.printer:. The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2.

But sometimes it still underextrudes on the layer beginning. It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements. The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2. 30.01.2021 · bonjour à toutes et à tous !dans cette vidéo, nous abordons le leveling automatique via 3dtouch sur une biqu b1 et/ou carte mère skr.vous pourrez retrouver l. But even now i get a lot more stringing than i'd like, especially compared to my old ender. Overall i'm quite pleased with the printing results but i'm having minor defects on the benchy test. Currently on the process of recalibrating my biqu b1. Gcode from teaching tech's calibration github, with settings as shown on pic.printer:

You can check if the upgrade took by looking at the sd card. It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements.. Currently on the process of recalibrating my biqu b1.

Not perfect on the red part (need to play with retraction settings), but good enough 29.03.2021 · i have just acquired my first 3d printer, a biqu b1. I've tried, but i can't seem to get it to the same level as my old ender3... Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+).

Not perfect on the red part (need to play with retraction settings), but good enough. . If it renames the firmware.bin to firmware.cur then it applied it.

Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+).. It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements. I've tried, but i can't seem to get it to the same level as my old ender3. 30.01.2021 · bonjour à toutes et à tous !dans cette vidéo, nous abordons le leveling automatique via 3dtouch sur une biqu b1 et/ou carte mère skr.vous pourrez retrouver l. Then reboot the printer and it will upgrade it. The other thing a cant find any good settings is the retraction distance and speed. But even now i get a lot more stringing than i'd like, especially compared to my old ender. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+). To update the firmware you need to put the 'firmware.bin' on an sd card, then put it in the slot closest to the gantry (not by the lcd). 29.03.2021 · i have just acquired my first 3d printer, a biqu b1. The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2.. Not perfect on the red part (need to play with retraction settings), but good enough

To update the firmware you need to put the 'firmware.bin' on an sd card, then put it in the slot closest to the gantry (not by the lcd).. Retraction distance (some have tuned down to 3mm with the bowden setup). 16.10.2021 · the settings that need tuning include:. Not perfect on the red part (need to play with retraction settings), but good enough

I've tried, but i can't seem to get it to the same level as my old ender3. Still a noob so i don't know how to interpret this, maybe someone will have any ideas. 16.10.2021 · the settings that need tuning include:

First, go to the 'travel' settings and check the 'enable retraction' box to enable it retraction speed: Still a noob so i don't know how to interpret this, maybe someone will have any ideas. To update the firmware you need to put the 'firmware.bin' on an sd card, then put it in the slot closest to the gantry (not by the lcd).

The other thing a cant find any good settings is the retraction distance and speed... Overall i'm quite pleased with the printing results but i'm having minor defects on the benchy test. Currently on the process of recalibrating my biqu b1. But sometimes it still underextrudes on the layer beginning.

16.10.2021 · the settings that need tuning include: 16.10.2021 · the settings that need tuning include: Still a noob so i don't know how to interpret this, maybe someone will have any ideas. Number of top layers (filament with good bridging may need fewer top layers to get a good finish). But sometimes it still underextrudes on the layer beginning. Overall i'm quite pleased with the printing results but i'm having minor defects on the benchy test. Gcode from teaching tech's calibration github, with settings as shown on pic.printer: Currently on the process of recalibrating my biqu b1. Gcode from teaching tech's calibration github, with settings as shown on pic.printer:

Number of top layers (filament with good bridging may need fewer top layers to get a good finish). Overall i'm quite pleased with the printing results but i'm having minor defects on the benchy test. The other thing a cant find any good settings is the retraction distance and speed. 16.10.2021 · the settings that need tuning include: The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2. Currently on the process of recalibrating my biqu b1. First, go to the 'travel' settings and check the 'enable retraction' box to enable it retraction speed: Just curious if anyone has dialed their b1 retraction settings well (for pla). But sometimes it still underextrudes on the layer beginning.. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+).

Retraction distance (some have tuned down to 3mm with the bowden setup). I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+). 16.10.2021 · the settings that need tuning include: Still a noob so i don't know how to interpret this, maybe someone will have any ideas... Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+).

First, go to the 'travel' settings and check the 'enable retraction' box to enable it retraction speed:.. Number of top layers (filament with good bridging may need fewer top layers to get a good finish). Retraction distance (some have tuned down to 3mm with the bowden setup)... Still a noob so i don't know how to interpret this, maybe someone will have any ideas.

Then reboot the printer and it will upgrade it.. But sometimes it still underextrudes on the layer beginning. To update the firmware you need to put the 'firmware.bin' on an sd card, then put it in the slot closest to the gantry (not by the lcd). Then reboot the printer and it will upgrade it. 16.10.2021 · the settings that need tuning include: I've tried, but i can't seem to get it to the same level as my old ender3. 30.01.2021 · bonjour à toutes et à tous !dans cette vidéo, nous abordons le leveling automatique via 3dtouch sur une biqu b1 et/ou carte mère skr.vous pourrez retrouver l. The stock profile settings of 7mm & 70mm/s didn't work too well for me, and after many, many retraction tests i've settled for the slightly better results at 3mm distance. The other thing a cant find any good settings is the retraction distance and speed.

It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements. Still a noob so i don't know how to interpret this, maybe someone will have any ideas. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+). First, go to the 'travel' settings and check the 'enable retraction' box to enable it retraction speed: 29.03.2021 · i have just acquired my first 3d printer, a biqu b1. 30.01.2021 · bonjour à toutes et à tous !dans cette vidéo, nous abordons le leveling automatique via 3dtouch sur une biqu b1 et/ou carte mère skr.vous pourrez retrouver l. First, go to the 'travel' settings and check the 'enable retraction' box to enable it retraction speed:

If it renames the firmware.bin to firmware.cur then it applied it.. To update the firmware you need to put the 'firmware.bin' on an sd card, then put it in the slot closest to the gantry (not by the lcd). Overall i'm quite pleased with the printing results but i'm having minor defects on the benchy test. 30.01.2021 · bonjour à toutes et à tous !dans cette vidéo, nous abordons le leveling automatique via 3dtouch sur une biqu b1 et/ou carte mère skr.vous pourrez retrouver l. Just curious if anyone has dialed their b1 retraction settings well (for pla).

Currently on the process of recalibrating my biqu b1. 16.10.2021 · the settings that need tuning include: Just curious if anyone has dialed their b1 retraction settings well (for pla). Number of top layers (filament with good bridging may need fewer top layers to get a good finish). If it renames the firmware.bin to firmware.cur then it applied it. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+). Then reboot the printer and it will upgrade it. 29.03.2021 · i have just acquired my first 3d printer, a biqu b1. Retraction distance (some have tuned down to 3mm with the bowden setup).. If it renames the firmware.bin to firmware.cur then it applied it.

Retraction distance (some have tuned down to 3mm with the bowden setup). I've tried, but i can't seem to get it to the same level as my old ender3. First, go to the 'travel' settings and check the 'enable retraction' box to enable it retraction speed: It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements. Retraction distance (some have tuned down to 3mm with the bowden setup). Number of top layers (filament with good bridging may need fewer top layers to get a good finish). Currently on the process of recalibrating my biqu b1. Number of top layers (filament with good bridging may need fewer top layers to get a good finish).

16.10.2021 · the settings that need tuning include: Currently on the process of recalibrating my biqu b1. I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. Not perfect on the red part (need to play with retraction settings), but good enough I've tried, but i can't seem to get it to the same level as my old ender3. Just curious if anyone has dialed their b1 retraction settings well (for pla). Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+). The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2. 30.01.2021 · bonjour à toutes et à tous !dans cette vidéo, nous abordons le leveling automatique via 3dtouch sur une biqu b1 et/ou carte mère skr.vous pourrez retrouver l. Then reboot the printer and it will upgrade it.. 16.10.2021 · the settings that need tuning include:

Retraction distance (some have tuned down to 3mm with the bowden setup). Retraction distance (some have tuned down to 3mm with the bowden setup). To update the firmware you need to put the 'firmware.bin' on an sd card, then put it in the slot closest to the gantry (not by the lcd). I've tried, but i can't seem to get it to the same level as my old ender3. But even now i get a lot more stringing than i'd like, especially compared to my old ender. But sometimes it still underextrudes on the layer beginning. I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations.. The other thing a cant find any good settings is the retraction distance and speed.

Gcode from teaching tech's calibration github, with settings as shown on pic.printer:.. Just curious if anyone has dialed their b1 retraction settings well (for pla). Currently on the process of recalibrating my biqu b1. I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2. It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements. Then reboot the printer and it will upgrade it. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+). Gcode from teaching tech's calibration github, with settings as shown on pic.printer: Number of top layers (filament with good bridging may need fewer top layers to get a good finish).. Just curious if anyone has dialed their b1 retraction settings well (for pla).

Just curious if anyone has dialed their b1 retraction settings well (for pla)... 16.10.2021 · the settings that need tuning include: 29.03.2021 · i have just acquired my first 3d printer, a biqu b1. I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. If it renames the firmware.bin to firmware.cur then it applied it. Number of top layers (filament with good bridging may need fewer top layers to get a good finish). It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+).. Still a noob so i don't know how to interpret this, maybe someone will have any ideas.

Not perfect on the red part (need to play with retraction settings), but good enough Then reboot the printer and it will upgrade it. But even now i get a lot more stringing than i'd like, especially compared to my old ender. Not perfect on the red part (need to play with retraction settings), but good enough I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. Retraction distance (some have tuned down to 3mm with the bowden setup). If it renames the firmware.bin to firmware.cur then it applied it. It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements. Just curious if anyone has dialed their b1 retraction settings well (for pla). I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations.

Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+).. Just curious if anyone has dialed their b1 retraction settings well (for pla).

The stock profile settings of 7mm & 70mm/s didn't work too well for me, and after many, many retraction tests i've settled for the slightly better results at 3mm distance. Still a noob so i don't know how to interpret this, maybe someone will have any ideas. The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2. 29.03.2021 · i have just acquired my first 3d printer, a biqu b1. Not perfect on the red part (need to play with retraction settings), but good enough 16.10.2021 · the settings that need tuning include: Overall i'm quite pleased with the printing results but i'm having minor defects on the benchy test. 30.01.2021 · bonjour à toutes et à tous !dans cette vidéo, nous abordons le leveling automatique via 3dtouch sur une biqu b1 et/ou carte mère skr.vous pourrez retrouver l. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+). Then reboot the printer and it will upgrade it.

But even now i get a lot more stringing than i'd like, especially compared to my old ender. 30.01.2021 · bonjour à toutes et à tous !dans cette vidéo, nous abordons le leveling automatique via 3dtouch sur une biqu b1 et/ou carte mère skr.vous pourrez retrouver l. You can check if the upgrade took by looking at the sd card. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+)... The other thing a cant find any good settings is the retraction distance and speed.

The other thing a cant find any good settings is the retraction distance and speed.. It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements. Currently on the process of recalibrating my biqu b1. Overall i'm quite pleased with the printing results but i'm having minor defects on the benchy test.

If it renames the firmware.bin to firmware.cur then it applied it. You can check if the upgrade took by looking at the sd card... 29.03.2021 · i have just acquired my first 3d printer, a biqu b1.

The other thing a cant find any good settings is the retraction distance and speed. But even now i get a lot more stringing than i'd like, especially compared to my old ender. Retraction distance (some have tuned down to 3mm with the bowden setup). Number of top layers (filament with good bridging may need fewer top layers to get a good finish). If it renames the firmware.bin to firmware.cur then it applied it.

Still a noob so i don't know how to interpret this, maybe someone will have any ideas. You can check if the upgrade took by looking at the sd card. The other thing a cant find any good settings is the retraction distance and speed. I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. Gcode from teaching tech's calibration github, with settings as shown on pic.printer: The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2. Just curious if anyone has dialed their b1 retraction settings well (for pla). I've tried, but i can't seem to get it to the same level as my old ender3.. But sometimes it still underextrudes on the layer beginning.

Just curious if anyone has dialed their b1 retraction settings well (for pla). But even now i get a lot more stringing than i'd like, especially compared to my old ender. Gcode from teaching tech's calibration github, with settings as shown on pic.printer:. The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2.

Then reboot the printer and it will upgrade it. 30.01.2021 · bonjour à toutes et à tous !dans cette vidéo, nous abordons le leveling automatique via 3dtouch sur une biqu b1 et/ou carte mère skr.vous pourrez retrouver l. Overall i'm quite pleased with the printing results but i'm having minor defects on the benchy test. I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. 16.10.2021 · the settings that need tuning include:

But even now i get a lot more stringing than i'd like, especially compared to my old ender... The other thing a cant find any good settings is the retraction distance and speed. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+). Retraction distance (some have tuned down to 3mm with the bowden setup). I've tried, but i can't seem to get it to the same level as my old ender3. First, go to the 'travel' settings and check the 'enable retraction' box to enable it retraction speed: Not perfect on the red part (need to play with retraction settings), but good enough The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2. Still a noob so i don't know how to interpret this, maybe someone will have any ideas.

Number of top layers (filament with good bridging may need fewer top layers to get a good finish). Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+). Not perfect on the red part (need to play with retraction settings), but good enough You can check if the upgrade took by looking at the sd card. I've tried, but i can't seem to get it to the same level as my old ender3. Number of top layers (filament with good bridging may need fewer top layers to get a good finish). But sometimes it still underextrudes on the layer beginning. If it renames the firmware.bin to firmware.cur then it applied it.

I've tried, but i can't seem to get it to the same level as my old ender3. Retraction distance (some have tuned down to 3mm with the bowden setup). Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+). The other thing a cant find any good settings is the retraction distance and speed. But even now i get a lot more stringing than i'd like, especially compared to my old ender. Just curious if anyone has dialed their b1 retraction settings well (for pla). 30.01.2021 · bonjour à toutes et à tous !dans cette vidéo, nous abordons le leveling automatique via 3dtouch sur une biqu b1 et/ou carte mère skr.vous pourrez retrouver l. 30.01.2021 · bonjour à toutes et à tous !dans cette vidéo, nous abordons le leveling automatique via 3dtouch sur une biqu b1 et/ou carte mère skr.vous pourrez retrouver l.

Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+).. Number of top layers (filament with good bridging may need fewer top layers to get a good finish). The stock profile settings of 7mm & 70mm/s didn't work too well for me, and after many, many retraction tests i've settled for the slightly better results at 3mm distance. Currently on the process of recalibrating my biqu b1. Still a noob so i don't know how to interpret this, maybe someone will have any ideas. Gcode from teaching tech's calibration github, with settings as shown on pic.printer: I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. Not perfect on the red part (need to play with retraction settings), but good enough Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+). 29.03.2021 · i have just acquired my first 3d printer, a biqu b1. The other thing a cant find any good settings is the retraction distance and speed.

16.10.2021 · the settings that need tuning include:.. Retraction distance (some have tuned down to 3mm with the bowden setup). Not perfect on the red part (need to play with retraction settings), but good enough 30.01.2021 · bonjour à toutes et à tous !dans cette vidéo, nous abordons le leveling automatique via 3dtouch sur une biqu b1 et/ou carte mère skr.vous pourrez retrouver l. If it renames the firmware.bin to firmware.cur then it applied it. It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements. Number of top layers (filament with good bridging may need fewer top layers to get a good finish). Then reboot the printer and it will upgrade it. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+). 29.03.2021 · i have just acquired my first 3d printer, a biqu b1.. Still a noob so i don't know how to interpret this, maybe someone will have any ideas.

Just curious if anyone has dialed their b1 retraction settings well (for pla).. Just curious if anyone has dialed their b1 retraction settings well (for pla). 29.03.2021 · i have just acquired my first 3d printer, a biqu b1. Number of top layers (filament with good bridging may need fewer top layers to get a good finish). The stock profile settings of 7mm & 70mm/s didn't work too well for me, and after many, many retraction tests i've settled for the slightly better results at 3mm distance. Overall i'm quite pleased with the printing results but i'm having minor defects on the benchy test. It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements. I've tried, but i can't seem to get it to the same level as my old ender3. 30.01.2021 · bonjour à toutes et à tous !dans cette vidéo, nous abordons le leveling automatique via 3dtouch sur une biqu b1 et/ou carte mère skr.vous pourrez retrouver l. Retraction distance (some have tuned down to 3mm with the bowden setup). But even now i get a lot more stringing than i'd like, especially compared to my old ender... It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements.

29.03.2021 · i have just acquired my first 3d printer, a biqu b1. Overall i'm quite pleased with the printing results but i'm having minor defects on the benchy test. I've tried, but i can't seem to get it to the same level as my old ender3. But sometimes it still underextrudes on the layer beginning. It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements. Still a noob so i don't know how to interpret this, maybe someone will have any ideas.

I've tried, but i can't seem to get it to the same level as my old ender3.. Currently on the process of recalibrating my biqu b1. I've tried, but i can't seem to get it to the same level as my old ender3. Still a noob so i don't know how to interpret this, maybe someone will have any ideas... 29.03.2021 · i have just acquired my first 3d printer, a biqu b1.

The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2. Retraction distance (some have tuned down to 3mm with the bowden setup). Overall i'm quite pleased with the printing results but i'm having minor defects on the benchy test. I've tried, but i can't seem to get it to the same level as my old ender3. Then reboot the printer and it will upgrade it. Still a noob so i don't know how to interpret this, maybe someone will have any ideas. 16.10.2021 · the settings that need tuning include: But sometimes it still underextrudes on the layer beginning. It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements.

Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+).. Gcode from teaching tech's calibration github, with settings as shown on pic.printer: If it renames the firmware.bin to firmware.cur then it applied it. The other thing a cant find any good settings is the retraction distance and speed. I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. Then reboot the printer and it will upgrade it. Currently on the process of recalibrating my biqu b1. Still a noob so i don't know how to interpret this, maybe someone will have any ideas.. 16.10.2021 · the settings that need tuning include:

The other thing a cant find any good settings is the retraction distance and speed.. It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements. Number of top layers (filament with good bridging may need fewer top layers to get a good finish). The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2. But sometimes it still underextrudes on the layer beginning. Still a noob so i don't know how to interpret this, maybe someone will have any ideas. Gcode from teaching tech's calibration github, with settings as shown on pic.printer:. Number of top layers (filament with good bridging may need fewer top layers to get a good finish).

Number of top layers (filament with good bridging may need fewer top layers to get a good finish). 29.03.2021 · i have just acquired my first 3d printer, a biqu b1. To update the firmware you need to put the 'firmware.bin' on an sd card, then put it in the slot closest to the gantry (not by the lcd). You can check if the upgrade took by looking at the sd card. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+). Just curious if anyone has dialed their b1 retraction settings well (for pla). But sometimes it still underextrudes on the layer beginning. The other thing a cant find any good settings is the retraction distance and speed. Just curious if anyone has dialed their b1 retraction settings well (for pla).

29.03.2021 · i have just acquired my first 3d printer, a biqu b1. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+). Number of top layers (filament with good bridging may need fewer top layers to get a good finish).

If it renames the firmware.bin to firmware.cur then it applied it. The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2. Number of top layers (filament with good bridging may need fewer top layers to get a good finish).

I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations... 29.03.2021 · i have just acquired my first 3d printer, a biqu b1. 16.10.2021 · the settings that need tuning include: Not perfect on the red part (need to play with retraction settings), but good enough Number of top layers (filament with good bridging may need fewer top layers to get a good finish). It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements. But even now i get a lot more stringing than i'd like, especially compared to my old ender. I've tried, but i can't seem to get it to the same level as my old ender3. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+). To update the firmware you need to put the 'firmware.bin' on an sd card, then put it in the slot closest to the gantry (not by the lcd).. To update the firmware you need to put the 'firmware.bin' on an sd card, then put it in the slot closest to the gantry (not by the lcd).

I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. First, go to the 'travel' settings and check the 'enable retraction' box to enable it retraction speed: To update the firmware you need to put the 'firmware.bin' on an sd card, then put it in the slot closest to the gantry (not by the lcd). Still a noob so i don't know how to interpret this, maybe someone will have any ideas. Then reboot the printer and it will upgrade it. The stock profile settings of 7mm & 70mm/s didn't work too well for me, and after many, many retraction tests i've settled for the slightly better results at 3mm distance. But sometimes it still underextrudes on the layer beginning. Not perfect on the red part (need to play with retraction settings), but good enough I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. Number of top layers (filament with good bridging may need fewer top layers to get a good finish). 16.10.2021 · the settings that need tuning include:

But even now i get a lot more stringing than i'd like, especially compared to my old ender... 30.01.2021 · bonjour à toutes et à tous !dans cette vidéo, nous abordons le leveling automatique via 3dtouch sur une biqu b1 et/ou carte mère skr.vous pourrez retrouver l. The other thing a cant find any good settings is the retraction distance and speed. Still a noob so i don't know how to interpret this, maybe someone will have any ideas. Retraction distance (some have tuned down to 3mm with the bowden setup). I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. 16.10.2021 · the settings that need tuning include: To update the firmware you need to put the 'firmware.bin' on an sd card, then put it in the slot closest to the gantry (not by the lcd). The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2. The stock profile settings of 7mm & 70mm/s didn't work too well for me, and after many, many retraction tests i've settled for the slightly better results at 3mm distance.

Gcode from teaching tech's calibration github, with settings as shown on pic.printer:.. 16.10.2021 · the settings that need tuning include: Then reboot the printer and it will upgrade it. Not perfect on the red part (need to play with retraction settings), but good enough I've tried, but i can't seem to get it to the same level as my old ender3. But sometimes it still underextrudes on the layer beginning. Retraction distance (some have tuned down to 3mm with the bowden setup). But even now i get a lot more stringing than i'd like, especially compared to my old ender. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+). 29.03.2021 · i have just acquired my first 3d printer, a biqu b1. The stock profile settings of 7mm & 70mm/s didn't work too well for me, and after many, many retraction tests i've settled for the slightly better results at 3mm distance. 29.03.2021 · i have just acquired my first 3d printer, a biqu b1.

First, go to the 'travel' settings and check the 'enable retraction' box to enable it retraction speed: 16.10.2021 · the settings that need tuning include: Retraction distance (some have tuned down to 3mm with the bowden setup). Not perfect on the red part (need to play with retraction settings), but good enough Still a noob so i don't know how to interpret this, maybe someone will have any ideas. To update the firmware you need to put the 'firmware.bin' on an sd card, then put it in the slot closest to the gantry (not by the lcd)... Retraction distance (some have tuned down to 3mm with the bowden setup).

I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. First, go to the 'travel' settings and check the 'enable retraction' box to enable it retraction speed:. 16.10.2021 · the settings that need tuning include:

Retraction distance (some have tuned down to 3mm with the bowden setup).. Not perfect on the red part (need to play with retraction settings), but good enough I've tried, but i can't seem to get it to the same level as my old ender3. If it renames the firmware.bin to firmware.cur then it applied it. To update the firmware you need to put the 'firmware.bin' on an sd card, then put it in the slot closest to the gantry (not by the lcd). But even now i get a lot more stringing than i'd like, especially compared to my old ender. It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements. 29.03.2021 · i have just acquired my first 3d printer, a biqu b1. The other thing a cant find any good settings is the retraction distance and speed. Just curious if anyone has dialed their b1 retraction settings well (for pla).

But even now i get a lot more stringing than i'd like, especially compared to my old ender. Overall i'm quite pleased with the printing results but i'm having minor defects on the benchy test. The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2. It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements. Still a noob so i don't know how to interpret this, maybe someone will have any ideas. The other thing a cant find any good settings is the retraction distance and speed. Not perfect on the red part (need to play with retraction settings), but good enough

I've tried, but i can't seem to get it to the same level as my old ender3. . Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+).

Then reboot the printer and it will upgrade it. Still a noob so i don't know how to interpret this, maybe someone will have any ideas. I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. Just curious if anyone has dialed their b1 retraction settings well (for pla). 30.01.2021 · bonjour à toutes et à tous !dans cette vidéo, nous abordons le leveling automatique via 3dtouch sur une biqu b1 et/ou carte mère skr.vous pourrez retrouver l.. First, go to the 'travel' settings and check the 'enable retraction' box to enable it retraction speed:

You can check if the upgrade took by looking at the sd card... If it renames the firmware.bin to firmware.cur then it applied it. First, go to the 'travel' settings and check the 'enable retraction' box to enable it retraction speed:.. Still a noob so i don't know how to interpret this, maybe someone will have any ideas.

I've tried, but i can't seem to get it to the same level as my old ender3.. Currently on the process of recalibrating my biqu b1. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+). The other thing a cant find any good settings is the retraction distance and speed. Not perfect on the red part (need to play with retraction settings), but good enough I've tried, but i can't seem to get it to the same level as my old ender3. If it renames the firmware.bin to firmware.cur then it applied it. Overall i'm quite pleased with the printing results but i'm having minor defects on the benchy test. Just curious if anyone has dialed their b1 retraction settings well (for pla). Number of top layers (filament with good bridging may need fewer top layers to get a good finish). To update the firmware you need to put the 'firmware.bin' on an sd card, then put it in the slot closest to the gantry (not by the lcd).

Retraction distance (some have tuned down to 3mm with the bowden setup). Not perfect on the red part (need to play with retraction settings), but good enough But sometimes it still underextrudes on the layer beginning. I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. I've tried, but i can't seem to get it to the same level as my old ender3. The other thing a cant find any good settings is the retraction distance and speed. The stock profile settings of 7mm & 70mm/s didn't work too well for me, and after many, many retraction tests i've settled for the slightly better results at 3mm distance. The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2. I've tried, but i can't seem to get it to the same level as my old ender3.

29.03.2021 · i have just acquired my first 3d printer, a biqu b1. Still a noob so i don't know how to interpret this, maybe someone will have any ideas. Not perfect on the red part (need to play with retraction settings), but good enough 30.01.2021 · bonjour à toutes et à tous !dans cette vidéo, nous abordons le leveling automatique via 3dtouch sur une biqu b1 et/ou carte mère skr.vous pourrez retrouver l. Then reboot the printer and it will upgrade it. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+). Just curious if anyone has dialed their b1 retraction settings well (for pla). If it renames the firmware.bin to firmware.cur then it applied it. Gcode from teaching tech's calibration github, with settings as shown on pic.printer:

First, go to the 'travel' settings and check the 'enable retraction' box to enable it retraction speed: But even now i get a lot more stringing than i'd like, especially compared to my old ender. Gcode from teaching tech's calibration github, with settings as shown on pic.printer: But sometimes it still underextrudes on the layer beginning. Number of top layers (filament with good bridging may need fewer top layers to get a good finish). I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations.. Just curious if anyone has dialed their b1 retraction settings well (for pla).

Number of top layers (filament with good bridging may need fewer top layers to get a good finish)... Not perfect on the red part (need to play with retraction settings), but good enough You can check if the upgrade took by looking at the sd card. Gcode from teaching tech's calibration github, with settings as shown on pic.printer: Just curious if anyone has dialed their b1 retraction settings well (for pla). To update the firmware you need to put the 'firmware.bin' on an sd card, then put it in the slot closest to the gantry (not by the lcd). Currently on the process of recalibrating my biqu b1. Number of top layers (filament with good bridging may need fewer top layers to get a good finish). Retraction distance (some have tuned down to 3mm with the bowden setup).

29.03.2021 · i have just acquired my first 3d printer, a biqu b1... To update the firmware you need to put the 'firmware.bin' on an sd card, then put it in the slot closest to the gantry (not by the lcd). Just curious if anyone has dialed their b1 retraction settings well (for pla). I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+).

Overall i'm quite pleased with the printing results but i'm having minor defects on the benchy test. Overall i'm quite pleased with the printing results but i'm having minor defects on the benchy test. Not perfect on the red part (need to play with retraction settings), but good enough You can check if the upgrade took by looking at the sd card. I've tried, but i can't seem to get it to the same level as my old ender3. If it renames the firmware.bin to firmware.cur then it applied it. 16.10.2021 · the settings that need tuning include: Still a noob so i don't know how to interpret this, maybe someone will have any ideas. The other thing a cant find any good settings is the retraction distance and speed. But even now i get a lot more stringing than i'd like, especially compared to my old ender.. If it renames the firmware.bin to firmware.cur then it applied it.

29.03.2021 · i have just acquired my first 3d printer, a biqu b1.. 16.10.2021 · the settings that need tuning include: Then reboot the printer and it will upgrade it. The stock profile settings of 7mm & 70mm/s didn't work too well for me, and after many, many retraction tests i've settled for the slightly better results at 3mm distance. But even now i get a lot more stringing than i'd like, especially compared to my old ender. The other thing a cant find any good settings is the retraction distance and speed. If it renames the firmware.bin to firmware.cur then it applied it. Just curious if anyone has dialed their b1 retraction settings well (for pla). I've tried, but i can't seem to get it to the same level as my old ender3. Not perfect on the red part (need to play with retraction settings), but good enough You can check if the upgrade took by looking at the sd card.

I'm not sure what the problem is, but i guess it's related to the overhang and maybe vibrations... The stock profile settings of 7mm & 70mm/s didn't work too well for me, and after many, many retraction tests i've settled for the slightly better results at 3mm distance. Number of top layers (filament with good bridging may need fewer top layers to get a good finish). You can check if the upgrade took by looking at the sd card. It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements. To update the firmware you need to put the 'firmware.bin' on an sd card, then put it in the slot closest to the gantry (not by the lcd). The other thing a cant find any good settings is the retraction distance and speed.. First, go to the 'travel' settings and check the 'enable retraction' box to enable it retraction speed:

The other thing a cant find any good settings is the retraction distance and speed.. Then reboot the printer and it will upgrade it. Gcode from teaching tech's calibration github, with settings as shown on pic.printer: 16.10.2021 · the settings that need tuning include: First, go to the 'travel' settings and check the 'enable retraction' box to enable it retraction speed: The other thing a cant find any good settings is the retraction distance and speed. The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2. It is recommended to test a print at 50mm/s and if you notice any issues in the filament, try decreasing the speed by 10 mm and stop when you notice improvements. 30.01.2021 · bonjour à toutes et à tous !dans cette vidéo, nous abordons le leveling automatique via 3dtouch sur une biqu b1 et/ou carte mère skr.vous pourrez retrouver l. Just curious if anyone has dialed their b1 retraction settings well (for pla). The stock profile settings of 7mm & 70mm/s didn't work too well for me, and after many, many retraction tests i've settled for the slightly better results at 3mm distance. The other thing a cant find any good settings is the retraction distance and speed.

First, go to the 'travel' settings and check the 'enable retraction' box to enable it retraction speed: Then reboot the printer and it will upgrade it. The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2. If it renames the firmware.bin to firmware.cur then it applied it. Not perfect on the red part (need to play with retraction settings), but good enough Still a noob so i don't know how to interpret this, maybe someone will have any ideas. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+).. Gcode from teaching tech's calibration github, with settings as shown on pic.printer:

I've tried, but i can't seem to get it to the same level as my old ender3.. I've tried, but i can't seem to get it to the same level as my old ender3. 29.03.2021 · i have just acquired my first 3d printer, a biqu b1. 16.10.2021 · the settings that need tuning include: Retraction distance (some have tuned down to 3mm with the bowden setup). Then reboot the printer and it will upgrade it. First, go to the 'travel' settings and check the 'enable retraction' box to enable it retraction speed: If it renames the firmware.bin to firmware.cur then it applied it. The stock profile settings of 7mm & 70mm/s didn't work too well for me, and after many, many retraction tests i've settled for the slightly better results at 3mm distance.. But sometimes it still underextrudes on the layer beginning.

Number of top layers (filament with good bridging may need fewer top layers to get a good finish). The other thing a cant find any good settings is the retraction distance and speed. Overall i'm quite pleased with the printing results but i'm having minor defects on the benchy test. Retraction speed (the b1 likes a faster speed with most pla filaments, 60mm/s+). Retraction distance (some have tuned down to 3mm with the bowden setup). I've tried, but i can't seem to get it to the same level as my old ender3. To update the firmware you need to put the 'firmware.bin' on an sd card, then put it in the slot closest to the gantry (not by the lcd).. The violet color makes its appearance more attractive independent chassis and 2040 aluminum profiles2.

16.10.2021 · the settings that need tuning include: You can check if the upgrade took by looking at the sd card. 29.03.2021 · i have just acquired my first 3d printer, a biqu b1.. 29.03.2021 · i have just acquired my first 3d printer, a biqu b1.

Then reboot the printer and it will upgrade it. .. Overall i'm quite pleased with the printing results but i'm having minor defects on the benchy test.